AWS

Overview

AWS is the Amazon public cloud, offering a full range of services and features across the globe in various datacenters. AWS provides businesses with a flexible, highly scalable, and low-cost way to deliver a variety of services using open standard technologies as well as proprietary solutions. This section of documentation will help you get Morpheus and AWS connected to utilize the features below:

Features

  • Instance, Service, Infrastructure Provisioning & Synchronization

  • EKS Cluster Creation & Synchronization

  • Morpheus Kubernetes, Docker & KVM Cluster Creation

  • ELB Classic Load Balancer Creation & Synchronization

  • ELB Application Load Balancer (ALB) Creation & Synchronization

  • Security Group Creation & Synchronization

  • Security Group Rule Creation & Synchronization

  • Network Synchronization

  • VPC Creation & Synchronization

  • CloudFormation Provisioning & Resource Synchronization

  • Terraform Provisioning & Resource Synchronization

  • Pricing & Costing Synchronization

  • MetaData Tag Creation & Synchronization

  • S3 Bucket Creation & Synchronization

  • Route53 Automation & Synchronization

  • IAM Profile Synchronization and Assignment

  • RDS Support

  • Backups / Snapshots

  • Migrations

  • Auto Scaling

  • Remote Console (SSH & RDP)

  • Lifecycle Management and Resize

  • Restore from Snapshots

  • Elastic IP Assignment

  • Network Pools

  • Enhanced Invoice Costing

Requirements

AWS IAM Security Credentials

Access Key Secret Key Sufficient User Privileges (see MinimumIAMPolicies section for more info)

Security Group Configuration for Agent Install, Script Execution, and Remote Console Access
  • Typical Inbound ports open from Morpheus Appliance: 22, 5985, 3389 (22 & 3389 required for Console. 22 & 5985 required for agent-less comms)

  • Typical Outbound to Morpheus Appliance: 443 (Required for Agent install & comms)

Note

These are required for Morpheus agent install, communication, and remote console access for windows and linux. Other configurations, such as docker instances, will need the appropriate ports opened as well. Cloud-init Agent Install mode does not require incoming access for port 22.

Network(s)

IP assignment required for Agent install, Script Execution, and Console if the Morpheus Appliance is not able to communicate with AWS instances private ip’s.

Note

Each AWS Cloud in Morpheus is scoped to an AWS Region and VPC. Multiple AWS Clouds can be added and even grouped if different region and VPC combinations are needed. It’s also recommended you verify Security Groups are properly configured in all regions Morpheus Clouds will scope to.

Adding an AWS Cloud

  1. Navigate to Infrastructure > Clouds

  2. Select + Create Cloud

  3. Select AWS

  4. Enter the following:

Cloud Configuration

NAME

Name of the Cloud in Morpheus

CODE

Unique code used for api/cli, automation and policies.

LOCATION

Description field for adding notes on the cloud, such as location.

VISIBILITY

For setting cloud permissions in a multi-tenant environment. Not applicable in single tenant environments.

TENANT

If Visibility is set to Private, select the Tenant the Cloud resources will assigned to.

ENABLED

When disabled, automatic Cloud sync is paused and the Cloud will not be selectable for provisioning.

AUTOMATICALLY POWER ON VMS

When enabled, Morpheus will maintain the expected power state of managed VMs. Morpheus will power on any managed VMs in the Cloud that have been shut down for unknown reasons (not powered off by Morpheus) to ensure availability of services.

Note

When “AUTOMATICALLY POWER ON VMS” is enabled, the power state of managed VMs should be maintained in Morpheus. This setting is not applicable to discovered/unmanaged resources.

Details

REGION

Select AWS Region for the Cloud

ACCESS KEY

Access Key ID from AWS IAM User Security Credentials.

SECRET KEY

Secret Access Key associated with the Access Key ID.

USE HOST IAM CREDENTIALS

Check to use use Host IAM Credentials

ROLE ARN

Supports security token service (STS) to AssumeRole by entering an AWS Role ARN

INVENTORY
Basic

Morpheus will sync information on all EC2 Instances in the selected VPC the IAM user has access to, including Name, IP Addresses, Platform Type, Power Status, and overall resources sizing for Storage, CPU and RAM, every 5 minutes. Inventoried EC2 Instances will appear as Unmanaged VM’s.

Full

In addition to the information synced from Basic Inventory level, Morpheus will gather Resource Utilization metrics for Memory, Storage and CPU utilization per VM.

Off

Existing EC2 Instances will not be inventoried

Note

Cloud Watch must be configured in AWS for Morpheus to collect Memory and Storage utilization metrics on inventoried EC2 instances.

USE VPC

Specify if the target account is using EC2-VPC or EC2-Classic Platform. In almost all cases, VPC should be selected, and then select the target VPC from the synced available VPC’s list, or All VPC’s.

  1. The AWS cloud is ready to be added to a group and saved. Additional configuration options available:

IMAGE TRANSFER STORE

S3 bucket for Image transfers, required for migrations into AWS.

EBS ENCRYPTION

Enable or disable encryption of EBS Volumes

COSTING KEY

For Gov Cloud pricing only, key for standard managing cost account

COSTING SECRET

For Gov Cloud pricing only, secret for standard managing cost account

Advanced Options

DOMAIN

Specify a default domain for instances provisioned to this Cloud.

SCALE PRIORITY

Only affects Docker Provisioning. Specifies the priority with which an instance will scale into the cloud. A lower priority number means this cloud integration will take scale precedence over other cloud integrations in the group.

APPLIANCE URL

Alternate Appliance url for scenarios when the default Appliance URL (configured in admin > settings) is not reachable or resolvable for Instances provisioned in this cloud. The Appliance URL is used for Agent install and reporting.

TIME ZONE

Configures the time zone on provisioned VM’s if necessary.

DATACENTER ID

Used for differentiating pricing among multiple datacenters. Leave blank unless prices are properly configured.

NETWORK MODE

Unmanaged or select a Network Integration (NSX, ACI etc)

LOCAL FIREWALL

On or Off. Enable to managed Host and VM firewall/IP Table rules (linux only)

SECURITY SERVER

Security Server setting is for Security Service Integrations such as ACI

TRUST PROVIDER

Select Internal (Morpheus) or an existing Trust Provider Integration

STORAGE MODE

Single Disk, LVM or Clustered

BACKUP PROVIDER

Select a backup provider. Depending on the Cloud type and any currently-configured backup plugins you may select Internal Backups (Morpheus) or another configured backup solution

REPLICATION PROVIDER

Sets the default Replication Provider for the Cloud. Select an existing Replication Provider Integration

GUIDANCE

Enable Guidance recommendations on cloud resources.

COSTING

Enable for Morpheus to sync Costing data from the Cloud provider, when available. For on-prem Clouds, enabling costing activates a costing service designed to mirror the live costing experience of public clouds, including invoicing with line items and real-time cost data (Operations > Costing > Invoices). If your organization utilizes reserved instances and you want to pull in related pricing data, select Costing and Reservations. If this is not relevant, select Costing to save money on additional calls to the AWS Cost Explorer API or similar service for other clouds.

DNS INTEGRATION

Records for instances provisioned in this cloud will be added to selected DNS integration.

SERVICE REGISTRY

Services for instances provisioned in this cloud will be added to selected Service Registry integration.

CONFIG MANAGEMENT

Select a Chef, Salt, Ansible or Puppet integration to be used with this Cloud.

CMDB

Select CMDB Integration to automatically update selected CMDB.

CMDB DISCOVERY

When checked, any automatically discovered (unmanaged) servers onboarded into Morpheus from this Cloud will also have CMDB records created for them.

CHANGE MANAGEMENT

Select an existing Change Management Integration to set on the Cloud. ex: Cherwell

AGENT INSTALL MODE
  • SSH / WINRM: Morpheus will use SSH or WINRM for Agent install.

  • Cloud Init / Unattend (when available): (DEFAULT) Morpheus will utilize Cloud-Init or Cloudbase-Init for agent install when provisioning images with Cloud-Init/Cloudbase-Init installed. Morpheus will fall back on SSH or WINRM if cloud-init is not installed on the provisioned image. Morpheus will also add Agent installation to Windows unattend.xml data when performing Guest Customizations or utilizing syspreped images.

API PROXY

Set a proxy for outbound communication from the Morpheus Appliance to the Cloud endpoints. Proxies can be added in the Infrastructure > Networks > Proxies tab.

INSTALL AGENT

Enable to have Agent Installation on by default for all provisioning into this Cloud. Disable for Agent Installation to be off by default for all provisioning into this Cloud.

Provisioning Options

PROXY

Set a proxy for inbound communication from Instances to the Morpheus Appliance. Proxies can be added in the Infrastructure > Networks > Proxies tab.

Bypass Proxy for Appliance URL

Enable to bypass proxy settings (if added) for Morpheus Agent communication to the Appliance URL.

NO PROXY

Include a list of IP addresses or name servers to exclude from proxy traversal

USER DATA (LINUX)

Add cloud-init user data. Morpheus 4.1.0 and earlier assumes bash syntax. Morpheus 4.1.1 and later supports all User Data formats. Refer to https://cloudinit.readthedocs.io/en/latest/topics/format.html for more information.

KMS KEY ID

For specify an AWS KMS key for encrypting EBS Volumes when volume encryption is enabled

Provisioning and Keypairs

During provisioning, users do not need to create or select a keypair as you would do when provisioning directly from the AWS console. If needed, Morpheus will create an AWS keypair without input from the user. In the AWS console and in the Morpheus Keypairs Section (Infrastructure > Trust > Key Pairs) you will see these keypairs listed. Morpheus will also inventory other keypairs which are created in your integrated AWS clouds and these will be listed out in the Morpheus Keypairs section.

These created keypairs are not accessible to the user as you do not see them at creation time and they are encrypted as stored in the Morpheus database. To have access to the Instance after provisioning, the user should have his or her user created during provisioning. This is done by creating a Linux user in Morpheus User Settings and associating a keypair with the user. If you don’t currently have a keypair to use, Morpheus can generate one for you in the Keypairs section.

../../../_images/userKeypair.png

With your user set in Morpheus User Settings, ensure that your user is being created during Instance provisioning. On the CONFIGURE tab of the Instance provisioning wizard, mark the “CREATE YOUR USER” box. This is normally checked by default if a user is configured in Morpheus User Settings but you can confirm that here.

../../../_images/createUser.png

It’s worth noting that adding your user to the provisioned workload does not replace the keypair used by Morpheus during provisioning. Instead it adds the public key for your user to the authorized keys file on the workload which allows you to access it. You can confirm this by catting out the authorized key file on any of your Morpheus-provisioned workloads (~/.ssh/authorized_keys). You will at least see two keys, one for the Morpheus service user and one for your own user.

Note

In general it should not cause problems if Morpheus-generated keypairs are deleted from the AWS console or from the Morpheus keypairs section. You would not lose console access to the VM. If needed, however, Morpheus will create more keypairs and there is currently no functionality to automatically remove these keypairs. They can be safely ignored, generally speaking there is no need to manually delete them.

Enhanced Invoice Costing Configuration

AWS cloud integrations in Morpheus will sync highly-granular costing data through the use of AWS Costing & Utilization Reports (CUR). If desired, users can turn on costing in the Morpheus Cloud configuration without linking a CUR to use AWS Cost Explorer instead. Morpheus version 4.2.3 also simplified the way CUR reports can be selected or created in order to sync costing data. The section below discusses setting up enhanced costing through CUR reports both in 4.2.3 and versions prior. For additional details on setting up costing with AWS GovCloud, see the next section.

Note

Even with a costing report configured in the Cloud integration as described below, the COSTING value must also be set to “Costing and Reservations” in order for enhanced invoice data to be brought into Morpheus. Confirm this setting by editing the Amazon Cloud integration, and checking the COSTING value in the Advanced Options panel before continuing.

v4.2.3 and Above

In Morpheus 4.2.3+, edit the Amazon cloud integration or create a new Amazon Cloud to get started. On the Create/Edit Cloud modal, open the advanced options section. The relevant fields for configuring invoice costing are shown below:

../../../_images/0billingFields.png

In the example case above, a new report and a new S3 bucket are created but Morpheus will also sync in buckets and reports that meet the required parameters if they already exist. For reports to be synced they must meet the requirements listed below:

  • Hourly time granularity

  • Include resource IDs

  • GZIP compression

  • CSV format

If you don’t currently have a report meeting those criteria, you can create one by selecting “New Report” from the REPORT NAME dropdown menu. A new S3 bucket can be created in similar fashion if needed. You may also want to review the section below on configuration for Morpheus 4.2.2 and below to note policies that will be applied to your selected bucket and Cost Explorer permissions required for the AWS cloud user associated with the Morpheus Cloud integration.

In the end, the following fields must be filled in order to complete the process:

  • COSTING BUCKET: The S3 bucket name

  • COSTING REGION: The region the bucket was created in

  • COSTING FOLDER: This is the report path prefix if you configured one earlier

  • COSTING REPORT NAME: The name given to your CUR report

  • COSTING KEY: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS Key ID for an IAM user with access

  • COSTING SECRET: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS Secret Key for the IAM account whose Key ID you entered in the previous field

  • LINKED ACCOUNT ID: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS account number that the IAM user from the above step resides in

Note

If the AWS cloud account is a GovCloud account, enter the COSTING KEY, COSTING SECRET, and LINKED ACCOUNT ID for the master commercial account your GovCloud account is associated with.

Using the Morpheus interface to create a CUR, and optionally a new S3 bucket, the IAM user requires permissions in AWS to be successful. By default, only the root user will have access to billing (including CUR), but billing can be enabled for IAM users following Amazon’s documentation for Activating IAM Access. Once IAM access is activated, policies need to be assigned to the user being configured on the cloud in Morpheus. If the user is an administrator of the AWS account, no additional policies are needed. Below are some example policies needed for different scenarios:

Creating a new CUR and new S3 bucket Click to Expand/Hide

{
  "Version": "2012-10-17",
  "Statement": [
      {
          "Effect": "Allow",
          "Action": [
              "s3:PutBucketPolicy",
              "s3:CreateBucket",
              "s3:ListBucket",
              "s3:GetBucketPolicy",
              "cur:DescribeReportDefinitions",
              "cur:PutReportDefinition"
          ],
          "Resource": "*"
      }
  ]
}

Creating a new CUR and using an existing S3 bucket Click to Expand/Hide

{
  "Version": "2012-10-17",
  "Statement": [
      {
          "Effect": "Allow",
          "Action": [
              "s3:ListBucket",
              "s3:GetBucketPolicy",
              "cur:DescribeReportDefinitions",
              "cur:PutReportDefinition"
          ],
          "Resource": "*"
      }
  ]
}

Using an existing CUR Click to Expand/Hide

{
  "Version": "2012-10-17",
  "Statement": [
      {
          "Effect": "Allow",
          "Action": [
              "cur:DescribeReportDefinitions"
          ],
          "Resource": "*"
      }
  ]
}

Important

The user configured on the cloud will need access to the objects in the S3 bucket configured on the CUR. If creating the CUR via the Morpheus UI, this should be done automatically. If an existing CUR report or existing S3 bucket was selected, ensure the user has permissions to access the objects in the configured S3 bucket. Alternatively, the COSTING KEY and COSTING SECRET can be used to configure a different user that has access to the S3 bucket.

v4.2.2 and Below

Begin by logging into the AWS Billing Console, then click Create report.

../../../_images/1billingConsole.png

Include a name for your report and mark the box to “Include resource IDs”. Morpheus uses these resource IDs to map costs to various resources. Click Next.

../../../_images/2reportConfig.png

On the following page, begin by identifying an S3 bucket to house reports. Click Configure near the top of the page and select an existing bucket or create a new one.

../../../_images/4chooseBucket.png

After identifying the bucket, you must mark the box to accept the default policy being applied to the bucket. Click Save.

../../../_images/5confirmPolicy.png

The default policy applied to the bucket is below:

{
  "Version": "2008-10-17",
  "Id": "SomeID",
  "Statement": [
    {
      "Sid": "SomeStmtID",
      "Effect": "Allow",
      "Principal": {
        "Service": "billingreports.amazonaws.com"
      },
      "Action": [
        "s3:GetBucketAcl",
        "s3:GetBucketPolicy"
      ],
      "Resource": "arn:aws:s3:::bucket-name"
    },
    {
      "Sid": "SomeStmtID",
      "Effect": "Allow",
      "Principal": {
        "Service": "billingreports.amazonaws.com"
      },
      "Action": [
        "s3:PutObject"
      ],
      "Resource": "arn:aws:s3:::bucket-name/*"
    }
  ]
}

After choosing a bucket, accepting the default policy, and saving the change, you’re brought back to the report delivery page. By default, CUR reports are saved to a folder at the path my-report-name/date-folder. If this bucket already contains CUR reports, you may want to specify a prefix path in the “Report path prefix” field. Outside of this field, use the default values as shown in the screenshot below, then click Next.

../../../_images/6completeDelivery.png

On the following page, make your final review and click Review and Complete. Following this, you will see your newly configured report in the list of CUR report(s).

In addition, the AWS cloud user associated with the integration in Morpheus needs IAM policy permission to access Cost Explorer. Attach a policy like the one below to this cloud user:

{
  "Version": "2012-10-17",
  "Id": "SomeID",
  "Statement": [
    {
      "Sid": "SomeStmtID",
      "Effect": "Allow",
      "Action": [
        "ce:DescribeReportDefinitions",
        "ce:DescribeCostCategoryDefinition",
        "ce:ListCostCategoryDefinitions"
      ],
      "Resource": [
        "*"
      ]
    }
  ]
}

Note

If the Cost Explorer permissions are granted at the master account level, the user will see all costs for each member account; if granted at the member account, only the costs for that member account are available.

With the AWS console configuration steps complete, we can move back into Morpheus. Keep in mind it is only necessary to set up one AWS cloud for Costing since we process all records in the CUR report.

Once back in Morpheus, add or edit the relevant AWS cloud integration (Infrastructure > Clouds > + ADD OR click the pencil icon in the row for the chosen AWS integration). Expand the Advanced Options drawer and complete the following fields:

  • COSTING BUCKET: The S3 bucket name

  • COSTING REGION: The region the bucket was created in

  • COSTING FOLDER: This is the report path prefix if you configured one earlier

  • COSTING REPORT NAME: The name given to your CUR report

  • COSTING KEY: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS Key ID for an IAM user with access

  • COSTING SECRET: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS Secret Key for the IAM account whose Key ID you entered in the previous field

  • LINKED ACCOUNT ID: If the IAM user for this AWS cloud integration does not have access to the S3 bucket with the CUR data, enter the AWS account number that the IAM user from the above step resides in

Note

If the AWS cloud account is a GovCloud account, enter the COSTING KEY, COSTING SECRET, and LINKED ACCOUNT ID for the master commercial account your GovCloud account is associated with.

../../../_images/7morphConfig.png

Save changes to your cloud integration.

Important

It may take as long as one hour for Morpheus to process the next CUR report.

Global (Costing Aggregator Only) (v5.5.1+)

Costing can be created for specific clouds individually, following the steps previously mentioned. If the same account is added multiple times, using different regions, the same CUR file is available to be selected (if the configured user has access). However, this can become a tedious process in needing to configure the CUR on each cloud added to Morpheus. However, Morpheus has a region of Global (Costing Aggregator Only), which can be chosen at the time of adding a cloud. This region is not designed for deploying workloads, it is here primarily for syncing costs. This means that the AWS account added as a cloud in Morpheus as a Global region can sync the cost for all the other regions of the same account added as clouds into Morpheus.

When using AWS Organizations, if the AWS account added as a gloabal region is the management account (formerly known as master account) and consolidated billing is enabled, costs for all accounts can be sync’d using the Global region. This means when any AWS and/or regions in the organization are added as clouds in Morpheus, the appropriate costs are applied to them automatically. It does require that Costing is enabled on the cloud to see the costs but a Costing Report does not need to be chosen. This enables the use of one cloud added as Global to sync all costs and apply to all AWS clouds added in Morpheus.

Additionally, some costs in AWS are not region specific, for example the Global and No Region regions. These costs do not apply to the regions of the clouds added in Morpheus. With the Global region added as a cloud in Morpheus, you would be able to see these costs that are applicable to your accounts.

Costing and AWS GovCloud

AWS GovCloud delivers Amazon public cloud infrastructure and features in a way that complies with U.S. government standards for security. GovCloud accounts are applied for and must be associated with a pre-existing standard AWS account and the usage and billing data for the GovCloud account is rolled up into that of the standard AWS account. For that reason, Amazon recommends creating a new standard account solely to house the GovCloud account if usage and billing must be tracked separately.

Since GovCloud accounts do not have access to billing data directly, Morpheus must be able to access it through the associated standard account. You could do this by creating the Morpheus cloud integration through the standard account itself or by integrating the GovCloud account and supplying an Access Key and Secret Key for the standard account when configuring costing. When needed, add the additional credentials for the standard commercial account as described below:

  1. Add a new AWS Cloud or edit an existing one

  2. Expand the Advanced Options section

  3. Complete the following fields in addition to other required fields needed to set up costing as described in the previous section:

    • COSTING KEY: The AWS Key ID for an IAM user with sufficient access who is associated with the standard commercial account

    • COSTING SECRET: The AWS Secret Key for an IAM user with sufficient access who is associated with the standard commercial account

    • LINKED ACCOUNT ID: The AWS account number for the standard commercial account in which the IAM user referenced in the prior bullets resides

  4. Save the changes to the AWS Cloud integration

When credentials are configured correctly, you will be able to select an existing Costing and Usage Report (CUR) from the appropriate S3 bucket if it already exists. If not, you can create one directly from the add/edit AWS Cloud modal in Morpheus.

../../../_images/8govcloudCosting.png

AWS Reserved Instances and Savings Plans

Amazon AWS public cloud offers Reserved Instances (RI) and Savings Plans, which allow organizations with consistent use patterns to reduce cloud spend significantly. Morpheus analyzes AWS cloud usage and spend, which allows it to make intelligent recommendations that can lead to significant savings. This data can be reviewed in the Reservation Recommendations and Savings Plan Recommendations tables on any AWS Cloud detail page (Infrastructure > Clouds > Selected Amazon Cloud).

Savings Plans potentially offer greater than 70% savings in exchange for a commitment to consistent usage levels for a 1- or 3-year term. Morpheus provides Savings Plan guidance based on learned analytics; allowing you to analyze Savings Plans based on different term commitments and upfront costs to choose the best savings plan.

../../../_images/savingsPlan.png

Reserved Instances (RI) provide a discounted hourly rate and optional capacity reservation for EC2 instances. AWS billing automatically applies your RI-discounted rate when the attributes of EC2 instance usage match attributes of an active RI. Morpheus provides RI guidance based on learned analytics.

../../../_images/ri.png

To retrieve Reserved Instances and Savings Plans data, the user configured on the cloud will require access to Cost Explorer. Below is an example IAM policy with Cost Explorer access:

Cost Explorer Policy Click to Expand/Hide

{
  "Version": "2012-10-17",
  "Statement": [
      {
          "Effect": "Allow",
          "Action": [
              "ce:*"
          ],
          "Resource": "*"
      }
  ]
}

AWS IAM Permissions

Below are the AWS IAM Permissions required for Morpheus services.

autoscaling

"autoscaling:AttachInstances",
"autoscaling:AttachLoadBalancerTargetGroups",
"autoscaling:CreateAutoScalingGroup",
"autoscaling:DeleteAutoScalingGroup",
"autoscaling:DeleteLaunchConfiguration",
"autoscaling:DeletePolicy",
"autoscaling:DescribeAutoScalingGroups",
"autoscaling:DescribeLaunchConfigurations",
"autoscaling:DescribeLoadBalancers",
"autoscaling:DescribePolicies",
"autoscaling:DetachInstances",
"autoscaling:PutScalingPolicy",
"autoscaling:UpdateAutoScalingGroup",

cloudformation

"cloudformation:CreateStack",
"cloudformation:DeleteStack",
"cloudformation:DescribeStackEvents",
"cloudformation:DescribeStackResources",
"cloudformation:DescribeStacks",
"cloudformation:GetTemplate",
"cloudformation:UpdateStack",
"cloudformation:ValidateTemplate",

cloudwatch

"cloudwatch:DeleteAlarms",
"cloudwatch:DescribeAlarms",
"cloudwatch:GetMetricStatistics",
"cloudwatch:PutMetricAlarm",

costexplorer

"ce:*",

Cost and Usage Reports

"cur:DescribeReportDefinitions",
"cur:PutReportDefinition",

ec2

"ec2:AllocateAddress",
"ec2:AssignPrivateIpAddresses",
"ec2:AssociateAddress",
"ec2:AttachInternetGateway",
"ec2:AttachNetworkInterface",
"ec2:AttachVolume",
"ec2:AuthorizeSecurityGroupEgress",
"ec2:AuthorizeSecurityGroupIngress",
"ec2:CancelExportTask",
"ec2:CancelImportTask",
"ec2:CopyImage",
"ec2:CopySnapshot",
"ec2:CreateEgressOnlyInternetGateway",
"ec2:CreateImage",
"ec2:CreateInstanceExportTask",
"ec2:CreateInternetGateway",
"ec2:CreateKeyPair",
"ec2:CreateNatGateway",
"ec2:CreateNetworkAcl",
"ec2:CreateNetworkAclEntry",
"ec2:CreateNetworkInterface",
"ec2:CreateRoute",
"ec2:CreateSecurityGroup",
"ec2:CreateSnapshot",
"ec2:CreateSubnet",
"ec2:CreateTags",
"ec2:CreateVolume",
"ec2:CreateVpc",
"ec2:DeleteEgressOnlyInternetGateway",
"ec2:DeleteInternetGateway",
"ec2:DeleteKeyPair",
"ec2:DeleteNatGateway",
"ec2:DeleteNetworkAcl",
"ec2:DeleteNetworkAclEntry",
"ec2:DeleteNetworkInterface",
"ec2:DeleteRoute",
"ec2:DeleteSecurityGroup",
"ec2:DeleteSnapshot",
"ec2:DeleteSubnet",
"ec2:DeleteTags",
"ec2:DeleteVolume",
"ec2:DeleteVpc",
"ec2:DeregisterImage",
"ec2:DescribeAccountAttributes",
"ec2:DescribeAddresses",
"ec2:DescribeAvailabilityZones",
"ec2:DescribeClassicLinkInstances",
"ec2:DescribeClientVpnConnections",
"ec2:DescribeClientVpnEndpoints",
"ec2:DescribeConversionTasks",
"ec2:DescribeEgressOnlyInternetGateways",
"ec2:DescribeExportTasks",
"ec2:DescribeImageAttribute",
"ec2:DescribeImages",
"ec2:DescribeImportImageTasks",
"ec2:DescribeImportSnapshotTasks",
"ec2:DescribeInstances",
"ec2:DescribeInstanceStatus",
"ec2:DescribeInstanceTypes",
"ec2:DescribeInternetGateways",
"ec2:DescribeKeyPairs",
"ec2:DescribeNatGateways",
"ec2:DescribeNetworkAcls",
"ec2:DescribeNetworkInterfaceAttribute",
"ec2:DescribeNetworkInterfaces",
"ec2:DescribeRegions",
"ec2:DescribeRouteTables",
"ec2:DescribeSecurityGroupReferences",
"ec2:DescribeSecurityGroups",
"ec2:DescribeSnapshotAttribute",
"ec2:DescribeSnapshots",
"ec2:DescribeStaleSecurityGroups",
"ec2:DescribeSubnets",
"ec2:DescribeTags",
"ec2:DescribeTransitGateways",
"ec2:DescribeTransitGatewayVpcAttachments",
"ec2:DescribeVolumeAttribute",
"ec2:DescribeVolumes",
"ec2:DescribeVolumeStatus",
"ec2:DescribeVpcAttribute",
"ec2:DescribeVpcClassicLink",
"ec2:DescribeVpcClassicLinkDnsSupport",
"ec2:DescribeVpcEndpoints",
"ec2:DescribeVpcEndpointServices",
"ec2:DescribeVpcPeeringConnections",
"ec2:DescribeVpcs",
"ec2:DescribeVpnGateways",
"ec2:DetachInternetGateway",
"ec2:DetachNetworkInterface",
"ec2:DetachVolume",
"ec2:DisassociateAddress",
"ec2:GetPasswordData",
"ec2:ImportImage",
"ec2:ImportInstance",
"ec2:ImportKeyPair",
"ec2:ImportSnapshot",
"ec2:ImportVolume",
"ec2:ModifyImageAttribute",
"ec2:ModifyInstanceAttribute",
"ec2:ModifyNetworkInterfaceAttribute",
"ec2:ModifySnapshotAttribute",
"ec2:ModifySubnetAttribute",
"ec2:ModifyVolumeAttribute",
"ec2:RebootInstances",
"ec2:RegisterImage",
"ec2:ReleaseAddress",
"ec2:ReplaceNetworkAclAssociation",
"ec2:ReplaceNetworkAclEntry",
"ec2:ResetImageAttribute",
"ec2:ResetInstanceAttribute",
"ec2:ResetNetworkInterfaceAttribute",
"ec2:ResetSnapshotAttribute",
"ec2:RevokeSecurityGroupEgress",
"ec2:RevokeSecurityGroupIngress",
"ec2:RunInstances",
"ec2:StartInstances",
"ec2:StopInstances",
"ec2:TerminateInstances",
"ec2:UnassignPrivateIpAddresses",
"ec2:UpdateSecurityGroupRuleDescriptionsEgress",

eks

"eks:*",

elasticloadbalancing

"elasticloadbalancing:AddTags",
"elasticloadbalancing:ApplySecurityGroupsToLoadBalancer",
"elasticloadbalancing:AttachLoadBalancerToSubnets",
"elasticloadbalancing:CreateListener",
"elasticloadbalancing:CreateLoadBalancer",
"elasticloadbalancing:CreateRule",
"elasticloadbalancing:CreateTargetGroup",
"elasticloadbalancing:DeleteListener",
"elasticloadbalancing:DeleteLoadBalancer",
"elasticloadbalancing:DeleteRule",
"elasticloadbalancing:DeleteTargetGroup",
"elasticloadbalancing:DescribeLoadBalancers",
"elasticloadbalancing:DescribeRules",
"elasticloadbalancing:DescribeTargetGroups",
"elasticloadbalancing:ModifyListener",
"elasticloadbalancing:ModifyTargetGroupAttributes",
"elasticloadbalancing:RegisterTargets",
"elasticloadbalancing:SetSecurityGroups",
"elasticloadbalancing:SetSubnets",

elasticsearch

"es:DescribeElasticsearchDomains",
"es:ListDomainNames",

iam

"iam:ListGroups",
"iam:ListInstanceProfiles",
"iam:ListRoles",

kms

"kms:Decrypt",
"kms:GenerateDataKey",

rds

"rds:AddRoleToDBCluster",
"rds:AddTagsToResource",
"rds:ApplyPendingMaintenanceAction",
"rds:AuthorizeDBSecurityGroupIngress",
"rds:CopyDBClusterSnapshot",
"rds:CopyDBParameterGroup",
"rds:CopyDBSnapshot",
"rds:CreateDBCluster",
"rds:CreateDBClusterSnapshot",
"rds:CreateDBInstance",
"rds:CreateDBInstanceReadReplica",
"rds:CreateDBSecurityGroup",
"rds:CreateDBSnapshot",
"rds:DeleteDBCluster",
"rds:DeleteDBInstance",
"rds:DeleteDBSecurityGroup",
"rds:DeleteDBSnapshot",
"rds:DescribeAccountAttributes",
"rds:DescribeCertificates",
"rds:DescribeDBClusterParameterGroups",
"rds:DescribeDBClusterParameters",
"rds:DescribeDBClusters",
"rds:DescribeDBClusterSnapshotAttributes",
"rds:DescribeDBClusterSnapshots",
"rds:DescribeDBEngineVersions",
"rds:DescribeDBInstances",
"rds:DescribeDBLogFiles",
"rds:DescribeDBParameterGroups",
"rds:DescribeDBParameters",
"rds:DescribeDBSecurityGroups",
"rds:DescribeDBSnapshotAttributes",
"rds:DescribeDBSnapshots",
"rds:DescribeDBSubnetGroups",
"rds:DescribeEngineDefaultClusterParameters",
"rds:DescribeEngineDefaultParameters",
"rds:DescribeEventCategories",
"rds:DescribeEvents",
"rds:DescribeOptionGroupOptions",
"rds:DescribeOptionGroups",
"rds:DescribeOrderableDBInstanceOptions",
"rds:ListTagsForResource",
"rds:ModifyDBCluster",
"rds:ModifyDBClusterParameterGroup",
"rds:ModifyDBClusterSnapshotAttribute",
"rds:ModifyDBInstance",
"rds:ModifyDBParameterGroup",
"rds:ModifyDBSnapshotAttribute",
"rds:PromoteReadReplica",
"rds:RebootDBInstance",
"rds:RemoveTagsFromResource",
"rds:RestoreDBClusterFromSnapshot",
"rds:RestoreDBClusterToPointInTime",
"rds:RestoreDBInstanceFromDBSnapshot",
"rds:RestoreDBInstanceToPointInTime",
"rds:RevokeDBSecurityGroupIngress",
"rds:StartDBInstance",
"rds:StopDBInstance",

route53

"route53:ChangeResourceRecordSets",
"route53:GetHostedZone",
"route53:ListHostedZones",
"route53:ListResourceRecordSets",

s3

"s3:AbortMultipartUpload",
"s3:CreateBucket",
"s3:DeleteBucket",
"s3:DeleteObject",
"s3:DeleteObjectVersion",
"s3:GetBucketLocation",
"s3:GetBucketPolicy",
"s3:GetObject",
"s3:GetObjectVersion",
"s3:ListAllMyBuckets",
"s3:ListBucket",
"s3:ListBucketMultipartUploads",
"s3:ListBucketVersions",
"s3:ListMultipartUploadParts",
"s3:PutBucketPolicy",
"s3:PutObject",

Systems Manager

"ssm:GetParameters",