Full HA Debian / Ubuntu Upgrade¶

The following covers upgrading the Morpheus App nodes in Full HA Architecture configurations to v7.0.3.

Important

The following is only for Full HA Architecture configurations, where MySQL, Elasticsearch and RabbitMQ services are external to the App nodes. The following steps assume 3 app nodes, adjust accordingly.

Morpheus Packages¶

Morpheus Release Package urls can be obtained from https://app.morpheushub.com

Non-rolling Upgrade¶

Warning

Rolling upgrades to v7.0.3 are not supported. Non-rolling upgrade instructions should be followed for all versions upgrading to 7.0.3. For that reason, the rolling upgrade instructions are hidden in this version of Morpheus docs. Should you need to see those steps, roll back to 7.0.2 Morpheus docs and view them there. Do not perform a rolling upgrade to 7.0.3.

Important

It is important to stop the morpheus-ui service on all app nodes prior to upgrade. Failure to do so will result in a flood of log errors due to previous message serialization conflict. The messages will eventually expire and the logs will clear.

Warning

Morpheus v7.0.3 contains new node and VM node packages that require 3.5GB of storage. It is safe to run sudo rm -Rf /var/opt/morpheus/package-repos/* after v7.0.3 package installation and before reconfigure to clean old node and vm node packages from the package-repo when room is needed.

Starting with App Node 3, on All App Nodes, stop the morpheus-ui services via morpheus-ctl stop morpheus-ui. If you receive a timeout, run morpheus-ctl graceful-kill morpheus-ui.
```
[root@app-server-3 ~]# morpheus-ctl stop morpheus-ui
```
```
[root@app-server-2 ~]# morpheus-ctl stop morpheus-ui
```
```
[root@app-server-1 ~]# morpheus-ctl stop morpheus-ui
```

Upgrade the deb package on App Node 1, then run a Reconfigure on App Node 1

[root@app-server-1 ~]# sudo wget https://packageUrl.morpheus-appliance_x.x.x-x_amd64.deb
[root@app-server-1 ~]# sudo dpkg -i morpheus-appliance_x.x.x-1_amd64.deb
[root@app-server-1 ~]# sudo morpheus-ctl stop morpheus-ui
[root@app-server-1 ~]# sudo morpheus-ctl reconfigure
[root@app-server-1 ~]# sudo morpheus-ctl start morpheus-ui

After the reconfigure has succeeded, tail the ui service to watch ui startup logs with morpheus-ctl tail morpheus-ui.

Once App Node 1 upgrade has completed and the ui is available, upgrade the deb package on App Node 2, then run a Reconfigure on App Node 2.

[root@app-server-2 ~]# sudo wget https://packageUrl.morpheus-appliance_x.x.x-x_amd64.deb
[root@app-server-2 ~]# sudo dpkg -i morpheus-appliance_x.x.x-1_amd64.deb
[root@app-server-1 ~]# sudo morpheus-ctl stop morpheus-ui
[root@app-server-1 ~]# sudo morpheus-ctl reconfigure
[root@app-server-1 ~]# sudo morpheus-ctl start morpheus-ui

After the reconfigure has succeeded, tail the ui service to watch ui startup logs with ``morpheus-ctl tail morpheus-ui``.

Once App Node 2 upgrade has completed and the ui is available, upgrade the deb package on App Node 3, and run a Reconfigure on App Node 3

[root@app-server-3 ~]# sudo wget https://packageUrl.morpheus-appliance_x.x.x-x_amd64.deb
[root@app-server-3 ~]# sudo dpkg -i morpheus-appliance_x.x.x-1_amd64.deb
[root@app-server-3 ~]# sudo morpheus-ctl reconfigure

The upgrade is complete and the Morpheus-ui services should be running on the three allocated nodes.

Important

If reconfigure after a rpm package upgrade stalls or hangs on starting a local service it is possible the morpheus-runsvdir service did not start or a process it was managing was manually shutdown or killed. To resolve, run systemctl stop morpheus-runsvdir then systemctl start morpheus-runsvdir, then run reconfigure again, morpheus-ctl reconfigure.