Automation¶

Library > Automation

The Automation section is composed of Tasks and Workflows. Tasks can be scripts added directly, scripts and blueprints from the Library section, recipes, playbooks, salt states, puppet agent installs, or http (api) calls. These Tasks are are combined into workflows, which can be selected to run at provision time or executed on existing instances via Actions > Run Workflow.

Tasks¶

Overview¶

There are many Task Types available, including scripts added directly, scripts and templates from the Library section, recipes, playbooks, salt states, puppet agent installs, and http (api) calls. Tasks are primarily created for use in Workflows, but a single Task can be executed on an existing instance via Actions > Run Task.

Role Permissions¶

The User Role Permission ‘Provisioning: Tasks FULL’ is required to create, edit and delete tasks.

Tasks Types that can execute locally against the Morpheus Appliance have an additional Role Permission: Tasks - Script Engines. Script Engine Task Types will be hidden for users without Tasks - Script Engines role permissions.

Common Options¶

When creating a Task, the required and optional inputs will vary significantly by the Task type. However, there are options which are common to Tasks of all types.

Target Options¶

When creating a Task, users can select a target to perform the execution. Some Task types allow for any of the three execution targets listed below and some will limit the user to two or just one. The table in the next section lists the available execution targets for each Task type.

Resource: A Morpheus-managed Instance or server is selected to execute the Task
Local: The Task is executed by the Morpheus appliance node
Remote: The user specifies a remote box which will execute the Task

Execute Options¶

Retryable: When marked, this Task can be configured to be retried in the event of failure
Retry Count: The maximum number of times the Task will be retried when there is a failure
Retry Delay: The length of time (in seconds) Morpheus will wait to retry the Task
Allow Custom Config: When marked, a text area is provided at Task execution time to allow the user to pass extra variables or specify extra configuration. See the next section for an example.

Allow Custom Config¶

When “Allow Custom Config” is marked on a Task, the user is shown a text area for custom configuration when the Task is executed manually from the Tasks List Page. If the Task is to be part of an Operational Workflow, mark the same box on the Workflow rather than on the Task to see the text area at execution time. This text area is inside the “Advanced Options” section, which must be expanded in order to reveal the text area. Within the text area, add a JSON map of key-value pairs which can be resolved within your automation scripts. This could be used to pass extra variables that aren’t always needed in the script or for specifying extra configuration.

Example JSON Map:

{"key1": "value1",
"key2": "value2",
"os": "linux",
"foo": "bar"}

When the Task is executed, these extra variables would be resolved where called into the script such as in the following simple BASH script example:

echo "<%=customOptions.os%>"
echo "<%=customOptions.foo%>"

The above example would result in the following output:

linux
bar

Task Types¶

**Available Task Types**¶
Task Type	Task Description	Source Options	Execute Target Options	Configuration Requirements	Role Permissions Requirements
Ansible	Runs an Ansible playbook. Ansible Integration required	Ansible Repo (Git)	Local, Resource	Existing Ansible Integration	Provisioning: Tasks
Ansible Tower	Relays Ansible calls to Ansible Tower	Tower Integration	Local, Remote, Resource	Existing Ansible Tower Integration	Provisioning: Tasks
Chef bootstrap	Executes Chef bootstrap and run list. Chef Integration required	Chef Server	Resource	Existing Chef Integration	Provisioning: Tasks
Email	Send an email from a Workflow	Task Content	Local	SMTP Configured	Provisioning: Tasks
Groovy script	Executes Groovy Script locally (on Morpheus app node)	Local, Repository, Url	Local	None	Provisioning: Tasks, Tasks - Script Engines
HTTP	Executes REST call for targeting external API’s.	Local	Local	None	Provisioning: Tasks
Javascript	Executes Javascript locally (on Morpheus app node)	Local	Local	None	Provisioning: Tasks, Tasks - Script Engines
jRuby Scirpt	Executes Ruby script locally (on Morpheus app node)	Local, Repository, Url	Local	None	Provisioning: Tasks, Tasks - Script Engines
Library Script	Creates a Task from an existing Library Script (Library > Templates > Script Templates)	Library Script	Resource	Existing Library Script	Provisioning: Tasks
Library Template	Creates a Task from an existing Library Template (Library > Templates > Spec Templates)	Library Template	Resource	Existing Library Templates	Provisioning: Tasks
Nested Workflow	Embeds a Workflow into a Task which allows the Workflow to be nested within other Workflows for situations when common Task sets are frequently used in Workflows	N/A	Local	N/A	Provisioning: Tasks, Provisioning: Workflows
PowerShell Script	Execute PowerShell Script on the Target Resource	Local, Repository, Url	Remote, Resource, Local	None	Provisioning: Tasks
Puppet Agent Install	Executes Puppet Agent bootstrap, writes `puppet.conf` and triggers agent checkin. Puppet Integration required	Puppet Master	Resource	Existing Puppet Integration	Provisioning: Tasks
Python Script	Executes Python Script locally	Local, Repository, Url	Local	`virtualenv` installed on Appliance Nodes	Provisioning: Tasks, Tasks - Script Engines
Restart	Restarts target VM/Host/Container and confirms startup status before executing next task in Workflow	System	Resource	None	Provisioning: Tasks
Shell Script	Executes Bash script on the target resource	Local, Repository, Url	Local, Remote, Resource	None	Provisioning: Tasks
vRealize Orchestrator Workflow	Executes vRO Workflow on the Target Resource	vRO Integration	Local, Resource	Existing vRO Integration	Provisioning: Tasks
Write Attributes	Add arbitrary values to the Attributes map of the target resource	N/A	Local	Provide map of values as valid JSON	Provisioning: Tasks

Task Configuration¶

Ansible Playbook
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- ANSIBLE REPO: Select existing Ansible Integration
- GIT REF: Specify tag or branch (Option, blank assumes default)
- PLAYBOOK: Name of playbook to execute, both playbook and playbook.yml format supported
- TAGS: Enter comma separated tags to filter executed tasks by (ie --tags)
- SKIP TAGS: Enter comma separated tags to run the playbook without matching tagged tasks (ie --skip-tags)
Important

Using different Git Refs for multiple Ansible Tasks in same Workflow is not supported. Git Refs can vary between Workflows, but Tasks in each Workflow must use the same Git Ref.
Ansible Tower Job
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- TOWER INTEGRATION: Select an existing Ansible Tower integration
- INVENTORY: Select an existing Inventory, when bootstrapping an Instance, Morpheus will add the Instance to the Inventory
- GROUP: Enter a group name, when bootstrapping an Instance, Morpheus will add the Instance to the Group if it exists. If it does not exist, Morpheus will create the Group
- JOB TEMPLATE: Select an existing job template to associate with the Task
- SCM OVERRIDE: If needed, specify an SCM branch other than that specified on the template
- EXECUTE MODE: Select Limit to Instance (template is executed only on Instance provisioned), Limit to Group (template is executed on all hosts in the Group), Run for all (template is executed on all hosts in the Inventory), or Skip Execution (to skip execution of the template on the Instance provisioned)
Chef bootstrap
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- CHEF SERVER: Select existing Chef integration
- ENVIRONMENT: Populate Chef environment, or leave as _default
- RUN LIST: Enter Run List, eg role[web]
- DATA BAG KEY: Enter data bag key (will be masked upon save)
- DATA BAG KEY PATH: Enter data bag key path, eg /etc/chef/databag_secret
- NODE NAME: Defaults to Instance name, configurable
- NODE ATTRIBUTES: Specify attributes inside the {}
Groovy script
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- CONTENT: Contents of the Groovy script if not sourcing it from a repository
Email
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- SOURCE: Choose local to draft or paste the email directly into the Task. Choose Repository or URL to bring in a template from a Git repository or another outside source
- EMAIL ADDRESS: Email addresses can be entered literally or Morpheus automation variables can be injected, such as <%=instance.createdByEmail%>
- SUBJECT: The subject line of the email, Morpheus automation variables can be injected into the subject field
- CONTENT: The body of the email is HTML. Morpheus automation variables can be injected into the email body when needed
- SKIP WRAPPED EMAIL TEMPLATE: The Morpheus-styled email template is ignored and only HTML in the Content field is used
Tip

To whitelabel email sent from Tasks, select SKIP WRAPPED EMAIL TEMPLATE and use an HTML template with your own CSS styling
HTTP (API)
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- URL: An HTTP or HTTPS URL as the HTTP Task target
- HTTP METHOD: GET (default), POST, PUT, PATCH, HEAD, or DELETE
- AUTH USER: Username for username/password authentication
- PASSWORD: Password for username/password authentication
- BODY: Request Body
- HTTP HEADERS: Enter requests headers, examples below:
Authorization

Bearer token

Content-Type

application/json
- IGNORE SSL ERRORS: Mark when making REST calls to systems without a trusted SSL certificate
Javascript
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- SCRIPT: Javascript contents to execute
jRuby Script
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- CONTENT: Contents of the jRuby script is entered here if it’s not being called in from an outside source
Library Script
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- SCRIPT: Search for an existing script in the typeahead field
Library Template
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- TEMPLATE: Search for an existing template in the typeahead field
Nested Workflow
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- OPERATIONAL WORKFLOW: The Workflow to be embedded as a Task for reference inside other Workflows
Powershell Script
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- ELEVATED SHELL: Run script with administrator privileges
- IP ADDRESS: IP address of the PowerShell Task target
- PORT: SSH port for PowerShell Task target (5985 default)
- USERNAME: Username for PowerShell Task target
- PASSWORD: Password for PowerShell Task target
- Content: Enter script to execute if not calling the script in from an outside source
Note

Setting the execution target to local requires Powershell to be installed on the Morpheus appliance box(es). Microsoft Documentation contains installation instructions for all major Linux distributions and versions.
Puppet Agent Install
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- PUPPET MASTER: Select Puppet Master from an existing Puppet integration
- PUPPET NODE NAME: Enter Puppet node name. Variables supported eg. <%= instance.name %>
- PUPPET ENVIRONMENT: Enter Puppet environment, eg. production
Python Script
Important

Beginning with Morpheus version 4.2.1, Python Tasks use virtual environments. For this reason, virtualenv must be installed on your appliances in order to work with Python Tasks. See the information below for more detailed steps to install virtualenv on your Morpheus appliance node(s).
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- CONTENT: Python script to execute is entered here if not pulled in from an outside repository
- COMMAND ARGUMENTS: Optional arguments passed into the Python script. Variables supported eg. <%= instance.name %>
- ADDITIONAL PACKAGES: Additional packages to be installed after requirements.txt (if detected). Expected format for additional packages: ‘packageName==x.x.x packageName2==x.x.x’, the version must be specified
- PYTHON BINARY: Optional binary to override the default Python binary
Enterprise Proxy Considerations

Additional considerations must be made in enterprise proxy environments where Python Tasks are run with additional package download requirements. These additional packages are downloaded using pip and may not obey global Morpheus proxy rules. To deal with this, create or edit the pip configuration file at /etc/pip.conf. Your configuration should include something like the following:
```
[global]
proxy = http://some-proxy-ip.com:8087
```
For more information, review the Pip documentation on using proxy servers here.

CentOS 7 / Python 2.7 (RHEL system Python)

With a fresh install of Morpheus on a default build of CentOS 7, Python Tasks will not function due to the missing requirement of virtualenv.

If you attempt to run a python task, you will get an error similar to the following:
```
Task Execution Failed on Attempt 1
sudo: /tmp/py-8ae51ebf-749c-4354-b6e4-11ce541afad5/bin/python: command not found
```
In order to run Morpheus Python Tasks in CentOS 7, install virtualenv: yum install python-virtualenv

If you require python3, you can specify the binary to be used while building the virtual environment. In a default install, do the following: yum install python3. Then, in your Morpheus Python Task, specify the binary in the PYTHON BINARY field as “/bin/python3”. This will build a virtual environment in /tmp using the python3 binary, which is equivalent to making a virtual environment like so: virtualenv ~/venv -p /bin/python3.

If you wish to install additional Python packages into the virtual environment, put them in pip format and space-separated into the ADDITIONAL PACKAGES field on the Python Task. Use the help text below the field to ensure correct formatting.

CentOS 8 and Python

In CentOS 8, Python is not installed by default. There is a platform-python but that should not be used for anything in userland. The error message with a default install of CentOS 8 will be similar to this:
```
Task Execution Failed on Attempt 1
sudo: /tmp/py-cffc9a8f-c40d-451d-956e-d6e9185ade33/bin/python: command not found
```
The default virtualenv for CentOS 8 is the python3 variety, for Morpheus to use Python Tasks, do the following: yum install python3-virtualenv

If Python2 is required, do the following: yum install python2 and specify /bin/python2 as the PYTHON BINARY in your Morpheus Task.

This will build a virtualenv in /tmp using the python2 binary, which is equivalent to making a virtualenv like so: virtualenv ~/venv -p /bin/python2

If you wish to install additional Python packages into the virtual environment, put them in pip format and space-separated into the ADDITIONAL PACKAGES field on the Python Task. Use the help text below the field to ensure correct formatting.
Restart
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
Shell Script
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- SUDO: Mark the box to run the script as sudo
- CONTENT: Script to execute is entered here if not pulled in from an outside repository
Tip

When the EXECUTE TARGET option is set to “Local” (in other words, the Task is run on the appliance itself), two additional fields are revealed: GIT REPO and GIT REF. Use GIT REPO to set the PWD shell variable (identifies the current working directory) to the locally cached repository (ex. /var/opt/morpheus-node/morpheus-local/repo/git/76fecffdf1fe96516e90becdab9de) and GIT REF to identify the Git branch the Task should be run from if the default (typically main or master) shouldn’t be used. If these options are not set, the working folder will be /opt/morpheus/lib/tomcat/temp which would not allow scripts to reference file paths relative to the repository (if needed).
vRealize Orchestrator Workflow
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- RESULT TYPE: Single Value, Key/Value Pairs, or JSON
- vRO INTEGRATION: Select an existing vRO integration
- WORKFLOW: Select a vRO workflow from the list synced from the selected integration
- PARAMETER BODY (JSON):
Write Attributes
- NAME: Name of the Task
- CODE: Unique code name for API, CLI, and variable references
- ATTRIBUTES: A JSON map of arbitrary values to write to the attributes property of the target resource
Tip

This is often useful for storing values from one phase of a Provisioning Workflow for access in another phase. See the video demo below for a complete example.

Task Management¶

Adding Tasks¶

Select Automation from within the Library menu
On the Tasks tab, click the Add button
From the New Task Wizard input a name for the task
Select the type of task from from the type dropdown
Input the appropriate configuration details. These will vary signficiantly based on the selected Task type. More details on each Task type are contained in the preceding sections.
Once done, click SAVE CHANGES

Tip

When writing a Task config, it’s often necessary to reference Morpheus variables which pertain to the specific Instance the Task is being run against. Morpheus includes a pop-out column along the right side of the Add/Edit Task modal which lists available variables. Click and drag the relevant variable into the config area and Morpheus will automatically fill in the variable call formatted for the currently chosen Task type. See the screenshot below.

Editing Tasks¶

Select Automation from within the Library menu
Click the pencil icon (✎) on the row of the task you wish to edit
Modify Task as needed
Once done, click SAVE CHANGES

Deleting Tasks¶

Select Automation from within the Library menu
Click the trash icon (🗑) on the row of the Task you wish to delete

Task Results¶

Overview¶

Using Task results, the output from any preceding Tasks within the same Workflow phase is available to be called into additional Tasks. The results are stored on the results variable. Since results are available to all Tasks, we can use results from any or all prior Tasks so long as they are executed within the same provision phase.

In script type tasks, if a RESULT TYPE is set, Morpheus will store the output on the results variable. It’s important to understand that the result type indicates the format of the Task output Morpheus should expect. Morpheus will parse that output into a Groovy map which can be retrieved and further parsed by resolving the results variable. If the RESULT TYPE is incorrectly set, Morpheus may not be able to store the Task results correctly. Jump to the section on Script Config Examples to see how script results are processed in various example cases.

Results Types¶

Single Value
Entire task output is stored in <%=results.taskCode%> or <%=results["Task Name"]%> variable.
Key/Value pairs
Expects key=value,key=value output. Entire task output is available with <%=results.taskCode%> or <%=results["Task Name"]%> variable (output inside []). Individual Values are available with <%=results.taskCode.key%> variables.
JSON
Expects key:value,key:value json formatted output. Entire task output is available with <%=results.taskCode%> or <%=results["Task Name"]%> variable (output inside []). Individual Values are available with <%=results.taskCode.key%> variables.

Important

The entire output of a script is treated as results, not just the last line. Ensure formatting is correct for the appropriate result type. For example, if Results Type is json and the output is not fully json compatible, the result would not return properly.

Important

Task results are not supported for Library Script task types

Script Config Examples¶

Single Value using Task Code

Source Task Config

NAME: Var Code (single)
CODE: singleExample
RESULT TYPE: Single Value
SCRIPT: echo "string value"

Source Task Output: string value

Results Task Config (using task code in variable)

NAME: N/A
CODE: N/A
RESULT TYPE: N/A
SCRIPT: echo "single: <%=results.singleExample%>"

Results Task Output: single: string value

Single Value using Task Name

Source Task Config

NAME: Var Code
CODE: none
RESULT TYPE: Single Value
SCRIPT: echo "string value"

Source Task Output

string value

Results Task using task name in variable

Results Task Script: echo "task name: <%=results["Var Code"]%>"
Results Task Output: task name: test value

Key/Value Pairs

Source Task Config

NAME: Var Code (keyval)
CODE: keyvalExample
RESULT TYPE: Key/Value pairs
SCRIPT: echo "flash=bang,ping=pong"

Source Task Output

flash=bang,ping=pong

Results Task for all results

Results Task Script: echo "keyval: <%=results.keyvalExample%>"
Results Task Output: keyval: [flash:bang, ping:pong]

Results Task for a single value)

Results Task Script: echo "keyval value: <%=results.keyvalExample.flash%>"
Results Task Output: keyval value: bang

JSON

Source Task Config

NAME: Var Code (json)
CODE: jsonExample
RESULT TYPE: JSON
SCRIPT: echo "{\"ping\":\"pong\",\"flash\":\"bang\"}"

Source Task Output

{"ping":"pong","flash":"bang"}

Results Task for all results

Results Task Script: echo "json: <%=results.jsonExample%>"
Results Task Output: json: [ping:pong, flash:bang]

Results Task for a single value

Results Task Script: echo "json value: <%=results.jsonExample.ping%>"
Results Task Output: json value: pong

Multiple Task Results

Results Task Script

echo "single: <%=results.singleExample%>"
echo "task name: <%=results["Var Code"]%>"
echo "keyval: <%=results.keyvalExample%>"
echo "keyval value: <%=results.keyval.flash%>"
echo "json: <%=results.jsonExample%>"
echo "json value: <%=results.jsonExample.ping%>"

Results Task Output

single: string value
task name: string value
keyval: [flash:bang, ping:pong]
keyval value: bang
json: [ping:pong, flash:bang]
json value: pong

Workflow Config¶

Add one or multiple tasks with Results Type configured to a workflow, and the results will be available to all tasks in the same phase of the workflow via the <%=results.variables%> during the workflow execution.

Task Results are only available to tasks in the same workflow phase
Task Results are only available during workflow execution

Workflows¶

Workflows are groups of Tasks, which are described in detail in the preceding section. Operational Workflows can be run on-demand against an existing Instance or server from the Actions menu on the Instance or server detail page. Additionally, they can be scheduled to run on a recurring basis through Morpheus Jobs (Provisioning > Jobs).

Provisioning Workflows are associated with Instances at provision time (in the Automation tab of the Add Instance wizard) or after provisioning through the Actions menu on the Instance detail page. Provisioning Workflows assign Tasks to various stages of the Instance lifecycle, such as Provision, Post Provision, and Teardown. When the Instance reaches a given stage, the appropriate Tasks are run. Task results and output can be viewed from the History tab of the Instance or server detail page.

Provisioning Workflow Execution Phases¶

Phase	Description	Usage Example	Notes
Configuration	Tasks are run prior to initial calls to the specified cloud API to initiate provisioning	Call to an external platform to dynamically generate a hostname prior to kicking off provisioning or dynamically altering configuration of a Catalog Item prior to provisioning
Price	Price Phase Tasks are only invoked when the Workflow is tied to a Layout. Like the Configuration Phase, these Tasks are run prior to any calls made to the target Cloud API and allow pricing data to be overridden for the Workload being provisioned. A “spec” variable containing Instance config is passed into the Task and a specific return payload is expected in order to work properly. Any other pricing (such as on the Service Plan) is overridden. See the section below for a detailed example of this Phase being used.	An MSP customer calling out to a custom pricing API to deliver Instance pricing to their own customers.	See the section below on Price Phase implementation for a detailed setup example.
Pre Provision	For VMs, Tasks are run after the VM is running and prior to any Tasks in the Provision phase. For containers, Tasks in this phase are run on the Docker host and prior to `docker run`	Prepare a Docker host to run containers	Pre Provision can be used for a Blueprint so it is added before a script which is set at the Provision phase executes. Pre Provision for scripts is mainly for Docker as you can execute on the host before the container is running.
Provision	Like pre-provision, Tasks for VMs are run after the VM is running. For containers, these Tasks are run on the containers once they are running on the host. For many users, this is the most commonly-used phase.	Join the server to a domain	Tasks included with in the Provision phase are considered to be vital to the health of the Instance. If a Task in the Provision phase fails, the Workflow will fail and the Instance provisioning will also fail. Tasks not considered to be vital to the existence of the Instance should go in the Post Provision phase where their failure will not constitute failure of the Instance.
Post Provision	Tasks are run after the entire provisioning process has completed	Disable UAC or Windows Firewall on a Windows box or join Active Directory	When adding a node to an Instance, Tasks in this phase will be run on all nodes in the Instance after the new node is provisioned. This is because Post Provision operations may need to affect all nodes, such as when joining a new node to a cluster. Tasks in Pre Provision and Provision phases would only be run on the new node in this scenario.
Start Service	Tasks in this phase are intended to start the service associated with the Instance type.	Include a script to start the service associated with the Instance (such as MySQL) which will execute when the Start Service action is selected from the Instance detail page	Start services is manually run from the Instance detail page and is designed to refer to the service the Instance provides.
Stop Service	Tasks in this phase intended to stop the service associated with the Instance type.	Include a script to stop the service associated with the Instance (such as MySQL) which will execute when the Stop Service action is selected from the Instance detail page	Stop services is manually run from the Instance detail page and is designed to refer to the service the Instance provides.
Pre Deploy	Tasks in this phase are run when a new deploy is triggered from the Deploy tab of the Instance detail page, prior to the deploy taking place.	Extract files from a deploy folder and move them to their final positions prior to deploy	Deployments are manually triggered from the Instance detail page and are designed to refer to deployment of services, like a website or database.
Deploy	Tasks in this phase are run when a new deploy is triggered from the Deploy tab of the Instance detail page, after the deploy has completed	Update configuration files or inject connection details from the environment at completion of the deploy process	Deployments are manually triggered from the Instance detail page and are designed to refer to deployment of services, like a website or database.
Reconfigure	Tasks in this phase are run when the reconfigure action is made against an Instance or host	Rescan or restart the Instance after a disk is added
Teardown	Tasks are run during VM or container destroy	Remove Active Directory objects prior to tearing down the Instance
Shutdown	Tasks are run immediately before the target is shutdown	Send an update on Instance power state to a CMDB
Startup	Tasks are run immediately before the target is started	Send an update on Instance power state to a CMDB

Add Workflow¶

Select the Library link in the navigation bar
Select Automation from the sub-navigation menu
Click the Workflows tab to show the Workflows tab panel
Click the + Add dropdown and select a Workflow type (Operational or Provisioning, see the section above for more on Workflow type differences)
From the New Workflow Wizard input a name for the workflow
Optionally input a description and a target platform
Add Tasks and Inputs using the typeahead fields, Tasks must be added to the appropriate phases for Provisioning Workflows
If multiple tasks are added to the same execution phase, their execution order can be changed by selecting the grip icon and dragging the task to the desired execution order
For multi-Tenant environments, select Public or Private visibility for the Workflow
For Operational Workflows, optionally mark “Allow Custom Config” from the Advanced Options section if needed. See the next section for more on this selection
Click the SAVE CHANGES button to save

Note

When setting Workflow visibility to Public in a multi-Tenant environment, Tenants will be able to see the Workflow and also execute it directly from the Workflows list (if it’s an Operational Workflow). They will not be able to edit or delete the Workflow.

Allow Custom Config¶

When “Allow Custom Config” is marked on Operational Workflows, the user is shown a text area for custom configuration at execution time. This text area is inside the “Advanced Options” section, which must be expanded in order to reveal the text area. Within the text area, add a JSON map of key-value pairs which can be resolved within your automation scripts. This could be used to pass extra variables that aren’t always needed in the script or for specifying extra configuration.

Example JSON Map:

{"key1": "value1",
"key2": "value2",
"os": "linux",
"foo": "bar"}

When the Workflow is executed, these extra variables would be resolved where called into the script such as in the following simple BASH script example:

echo "<%=customOptions.os%>"
echo "<%=customOptions.foo%>"

The above example would result in the following output:

linux
bar

Retrying Workflows¶

When a Workflow fails, Morpheus allows users to retry from the failed Task. Access the Workflow execution from the executions list page (Provisioning > Executions), from the Executions tab of the Workflow detail page (Library > Automation > Workflows > Selected Workflow), or from the History tab on the Instance detail page (Provisioning > Instances > Selected Instance). From the execution, select the Retry button which looks like a clockwise circular arrow and is highlighted in the screenshot below. This can be very useful as it allows you to resume what could potentially be a very long running Workflow from a point of failure without needing to start from the beginning. Similarly, if a provisioned Instance is in a failed state due to a failure in an attached Workflow (such as a failed Task in the Provision phase of an attached Provisioning Workflow), the user can opt to resume the Tasks from the failure point after making a correction and restore the Instance to a successfully-provisioned state.

Retry Workflow Tasks Video Demo

Price Phase Task Utilization¶

Price Phase Tasks Video Demo

Price Phase Tasks allow computed pricing for any workload in any Cloud (even public Clouds) to be overridden based on custom logic designed by the user. The variable “spec” is fed into the Task which represents the Instance configuration. The Task can be designed to use the Instance config data and compute an appropriate price for the Instance. Morpheus expects a return payload in the format below for the price override to work correctly. If used, pricing computed via Task replaces any other costing data which would have been applied to the workload (such as pricing based on the Service Plan). The user will see price estimates based on the Price Phase Task in the Instance provisioning wizard where the Service Plan pricing would otherwise be shown. Additionally, since Workflows which invoke Price Phase Tasks are tied to the Layout, the user can see different pricing depending on which Instance Type Layout is selected.

Note

Price Phase Tasks are only invoked if the Workflow is tied to a Layout.

The return payload should be a JSON array of “priceData” objects. priceData objects should contain values for each of the keys in the table below:

Key	Description	Data Type	Possible Values
incurCharges	Indicates the Instance state when this charge should be applied	String	Running: Charge is incurred while the workload is in a running state, Stopped: Charge is incurred while the workload is in a stopped or shutdown state, Always: This charge is always applied. Some charges may apply simultaneously, for example, “Always” and “Running” states will apply while the workload is running.
currency	Indicates the currency in which the charge will be applied	String	Enter any three-letter currency code which Morpheus supports for its pricing, such as “USD”, “CAD”, or “GBP”
unit	Indicates the time interval at which the charge is applied	String	Enter “minute”, “hour”, “day”, “month”, or “year”
cost	Indicates the amount applied as cost for each configured time unit interval that passes. This is the cost to you, not the price with markup which the customer would see.	Number	A numerical amount such as “3.00” or “34.23”
price	Indicates the amount applied as price for each configured time unit interval that passes. This is the price to the customer with any built-in markup you need to apply.	Number	A numerical amount such as “3.00” or “34.23”

A number of different Task types could be used in this phase. As long as the Task is returning the required JSON array, the Task will work correctly. Below is an example using a Groovy Task. This is simply outputting a static payload though in a real world scenario you’d likely use Task logic to output a dynamic array based on the Instance configuration.

def rtn = [
  priceData: [
    [
      incurCharges: 'always',
      currency: 'USD',
      unit: 'hour',
      cost: 2.0,
      price: 2.0
    ],
    [
      incurCharges: 'running',
      currency: 'USD',
      unit: 'hour',
      cost: 3.0,
      price: 3.0
    ],
    [
      incurCharges: 'stopped',
      currency: 'USD',
      unit: 'hour',
      cost: 1.0,
      price: 1.0
    ]
  ]
]
return rtn

Nesting Workflows¶

Morpheus allows Workflows to be nested for easier Workflow creation when many Workflows are used in an environment which have only slight differences or which are made up of common pieces. Nestable Workflows are created like any other Operational Workflow. Once the Workflow is saved, it can be embedded into a special Task type called “Nested Workflow.” A Nested Workflow-type Task simply references an Operational Workflow which may need to be used within other Workflows. Once Nested Workflow Tasks are created they can be used as part of any new Operational or Provisioning Workflows that are created thereafter (or may be added to existing Workflows too). For more on creating Tasks, see Morpheus Task documentation.

Note

Results from prior Tasks are still accessed using the same syntax even when a prior Task is embedded in a Nested Workflow. Additional syntax to reference the Nested Workflow Task or the Workflow itself are not needed. See Morpheus Task documentation for more on chaining Task results.

Nested Workflows Video Demo

Edit Workflow¶

Select the Library link in the navigation bar.
Select Automation from the sub-navigation menu.
Click the Workflows tab to show the workflows tab panel.
Click the Edit icon on the row of the workflow you wish to edit.
Modify information as needed.
Click the Save Changes button to save.

Delete Workflow¶

Select the Library link in the navigation bar.
Select Automation from the sub-navigation menu.
Click the Workflows tab to show the workflows tab panel.
Click the Delete icon on the row of the workflow you wish to delete.

Scale Thresholds¶

Scale Thresholds are pre-configured settings for auto-scaling Instances. When adding auto-scaling to an instance, existing Scale Thresholds can be selected to determine auto-scaling rules.

Creating Scale Thresholds¶

Navigate to Library > Automation > Scale Thresholds
Select + ADD
Populate the following:

NAME: Name of the Scale Threshold
AUTO UPSCALE: Enable to automatically upscale per Scale Threshold specifications
AUTO DOWNSCALE: Enable to automatically downscale per Scale Threshold specifications
MIN COUNT: Minimum node count for Instance. Auto-scaling will not downscale below MIN COUNT, and will auto upscale if the MIN COUNT is not met)
MAX COUNT: Maximum node count for Instance. Auto-scaling will not upscale past MAX COUNT, and will auto downscale if MAX COUNT is exceeded.
ENABLE MEMORY THRESHOLD: Check to set auto-scaling by specified memory utilization threshold (%)
MIN MEMORY: Enter MIN MEMORY % for triggering downscaling.
MAX MEMORY: Enter MAX MEMORY % for triggering upscaling.
ENABLE DISK THRESHOLD: Check to set auto-scaling by specified disk utilization threshold (%)
MIN DISK: Enter MIN DISK % for triggering downscaling.
MAX DISK: Enter MAX DISK % for triggering upscaling.
ENABLE CPU THRESHOLD: Check to set auto-scaling by specified overall CPU utilization threshold (%)
MIN CPU: Enter MIN CPU % for triggering downscaling.
MAX CPU: Enter MAX CPU % for triggering upscaling.

Power Scheduling¶

Set weekly schedules for shutdown and startup times for Instances and VM’s, apply Power Schedules to Instances pre or post-provisioning, apply Power Schedule policies on Group or Clouds, or use Guidance to automatically recommend and apply optimized Power Schedules.

Create Power schedules¶

Navigate to Library > Automation > Power Scheduling
Select + ADD
Configure the following options:

NAME
Name of the Power Schedule

DESCRIPTION
Description for the Power Schedule

TIME ZONE
Time Zone the Power Schedule times correlate to.

TYPE

Power On
Power Up and then Down at scheduled times

Power off
Power Down then Up at scheduled times

Enabled
Check for Power Schedule to be Active. Uncheck to disable Power Schedule.

DAYS
Slide the start and end time controls for each day to configure each days Schedule. Green sections indicate Power on, red sections indicate Power Off. Time indicated applies to selected Time Zone. The sliders can be used to set time in 15-minute steps, for single-minute granularity click the pencil icon and enter a specific time down to the minute.
Select SAVE CHANGES

Tip

To view the Instances a power schedule is currently set on, select the name of a Power Schedule to go to the Power Schedule Detail Page.

Add Power Schedule to Instance¶

Navigate to Provisioning > Instances
Select an Instance
Select EDIT
In the POWER SCHEDULE dropdown, select a Power Schedule.
Select SAVE CHANGES

Add Power Schedule to Virtual Machine¶

Navigate to Infrastructure > Compute > Virtual Machines
Select a Virtual Machine
Select EDIT
Expand the Advanced Options section
In the POWER SCHEDULE dropdown, select a Power Schedule.
Select SAVE CHANGES

Add Power Schedule Policy¶

Note

Power Schedule Policies apply to Instances created after the Policy is enabled.

Navigate to Administration > Policies
Select + ADD
Select TYPE Power Schedule
Configure the Power Schedule Policy:
NAME
Name of the Policy

DESCRIPTION
Add details about your Policy for reference in the Policies tab.

Enabled
Policies can be edited and disabled or enabled at any time. Disabling a Power Schedule Policy will prevent the Power Schedule from running on the Clouds Instances until re-enabled.

ENFORCEMENT TYPE
- User Configurable: Power Schedule choice is editable by User during provisioning.
- Fixed Schedule: User cannot change Power Schedule setting during provisioning.
POWER SCHEDULE
Select Power Schedule to use in the Policy. Power schedule can be added in Library > Automation > Power Scheduling

SCOPE

Global
Applies to all Instances created while the Policy is enabled

Group
Applies to all Instances created in or moved into specified Group while the Policy is enabled

Cloud
Applies to all Instances created in specified Cloud while the Policy is enabled

User
Applies to all Instances created by specified User while the Policy is enabled

Role
Applies to all Instances created by Users with specified Role while the Policy is enabled

Permissions- TENANTS
Leave blank to apply to all Tenants, or search for and select Tenants to enforce the Policy on specific Tenants.
Select SAVE CHANGES

Execute Scheduling¶

Execute Scheduling creates time schedules for Jobs, including Task, Workflow and Backup Jobs. Jobs, which are discussed in greater detail in another section of Morpheus docs, combine either a Task or Workflow with an Execute Schedule to run the selected Task or Workflow at the needed time. Backup Jobs are a special type of Job configured in the Backups section which also use Execute Schedules to time backup runs as needed.

Schedules use CRON expressions, such as 0 23 * * 2 equalling Executes every week on Tuesday at 23:00. CRON expressions can easily be created by clicking the corresponding translation in the create or edit Execution Schedule modal below the Schedule field and selecting a new value.

Note

Execute Schedules cron expressions should not include seconds or years. The days of the week should be numbered 1-7, beginning with Sunday and ending with Saturday. SUN-SAT notation may also be used. For more on writing CRON expressions, many guides are hosted on the Internet including this one. Morpheus execution schedules support most cron syntax but certain more complex expressions may fail to evaluate and the execute schedule will not save. Additionally, some complex expressions may save and work correctly while the friendly written evaluation below the SCHEDULE field is not interpreted correctly. This is due to an issue with the underlying library used to build this feature and cannot easily be resolved at this time.

Create Execution Schedules¶

NAME: Name of the Execution Schedule

Note

When assigning Execution Schedules, the name value will appear in the selection drop-down. Using a name that references the time interval is often helpful
DESCRIPTION: Description of the Execution Schedule for reference in the Execution Schedules list
VISIBILITY: Master Tenant administrators may share Execute Schedules with Subtenants by setting the visibility to Public
TIME ZONE: The time zone for execution
Enabled: Check to enable the schedule. Uncheck to disable all associated executions and remove the schedule as an option for Jobs in the future
SCHEDULE: Enter CRON expression for the Execution Schedule, for example 0 0 * * * equals Every day at 00:00
SCHEDULE TRANSLATION: The entered CRON schedule is translated below the SCHEDULE field. Highlighted values can be updated by selecting the value, and relevant options will be presented. The CRON expression will automatically be updated

Authorization	Bearer token
Content-Type	application/json